Utilize a Pneumatic Forklift
You can usually find pneumatic forklifts in shipping and warehouse operations. Also called pump trucks or pallet trucks, they are utilized in order to move supplies and things around on wooden pallets utilizing metal forks mounted on a wheeled counterweight. The counterweight has a pump which raises the forks off the ground. A pallet truck is intended to be operated by one person.
To be able to avoid loosing control while raising heavy loads, pallet trucks should always be operated with care. Machine must be checked before operating. Clear the wheels area of any obstacle. Check that the handle turns smoothly. The pallet must be stacked carefully to guarantee that nothing will fall off during transportation.
To lower the forks and release air in the pump, squeeze the lever located on the inside of the metal loop on the end of the pallet truck's handle. The forks could then be pushed into the slots of the pallet. The forks must be in the middle in order to guarantee equal distribution of the pallet's weight across them. Lift the forks from the ground by pumping the handle of the pneumatic lift until the pallet has completely cleared the ground. Do not raise the pallet too high or the forklift can unbalance.
Pull on the handle and drag it behind you if you want to move the pallet. It is truly dangerous to push the pallet ahead of you since the momentum can cause it to lose control. Slowly take turns and don't attempt to stop suddenly. Gradually come to a stop, squeeze the lever, and the forks would lower to the ground. Lastly, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent location.